LX H30-R1 3.0KW 1.5" Without pressure switch Cable (Straight)

LX H30-R1 3.0KW 1.5 inch heater (Straight) with sensor wire

Description:  Chinese LX Whirlpool Bath Heater assembly. H30-R1. Danz spas, Hot price tubs, Tubs2u, Chinese

Power: 3.0kw

Volts: 230
Hz: 50
KW: 3.0
Amps: 13.6

Specification:

Sensor compatibility: Controlled by the system control box
Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not work
Flow detection: Pressure switch built into the heater.

Compatible with: Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project.

Connections / Fixings: 1.5 inch white plastic female sockets to connect to plumbing.

Dimensions: Heater Diameter:50mm
                           Overall height: 120mm
                           Overall length complete: 340mm