LX H30-R1 3.0KW 1.5" heater (Straight) with pressure switch cable

LX H30-R1 3.0KW 1.5 inch heater (Straight) with sensor wire

Description:  Chinese LX Whirlpool Bath Heater assembly. H30-R1. Danz spas, Hot price tubs, Tubs2u, Chinese

Power: 3.0kw

Volts: 230
Hz: 50
KW: 3.0
Amps: 13.6

Specification:

Sensor compatibility: Controlled by the system control box
Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not work
Flow detection: Pressure switch built into the heater run on a separate cord.

Compatible with: Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project.

Connections / Fixings: 1.5 inch white plastic female sockets to connect to plumbing.

Dimensions: Heater Diameter:50mm
                           Overall height: 120mm
                           Overall length complete: 340mm

This unit replaces the Rooster heater as they kept failing. This heater is longer than the Rooster so you may need to alter the plumbing slightly

High limit thermal cutout built in. This unit is rated IPX5 and has CE approval.